DoorBird D10 Serie Manual De Instalación página 3

WARNING
∙ For safety, approval and licensing reasons (CE/FCC/IC etc.), unauthorized
change and/or modification of the device is not permitted.
∙ The device is not a toy; do not allow children to play with it. Do not
leave packaging material lying around. Plastic films/bags, pieces of
polystyrene, etc. can be dangerous in the hands of a child.
∙ Always lay cables in such a way that they do not become a risk to
people and domestic animals.
∙ Voltage is applied to parts within the equipment. Do not touch any
parts that are not associated with the installation, wiring, or connection.
Electric shock could result.
∙ On devices which are not marked as weather-proof: Keep the device
away from water or any other liquid.
∙ Do not install or make any wire terminations while power supply is
plugged in. It can cause eletric shock or damage to the device.
∙ Before turning on power, make sure wires are not crossed or shorted.
If not, fire or eletric shock could result.
∙ High voltage may be present internally. Do not open the device.
Electric shock could result.
∙ The device is not of explosion-proof. Do not install or use near gases
or flammable materials. Fire or explosion could result.
∙ Do not install two power supplies in parallel to a single input. Fire or
damage to the device could result. Be sure to connect a single power
supply to the device.
∙ Do not connect any terminal on the device to an AC power line. Fire
or electric shock could result.
∙ Keep AC cord from being marred or crushed. If the AC cord is fractured,
fire or electric shock could result.
∙ Do not plug or unplug with wet hands. Electric shock could result.
4
∙ Do not put any metal or flammable material into the device.
Fire, electric shock, or device trouble could result.
∙ Existing wiring such as chime wiring, etc. may contain high voltage
AC electricity. Damage to the device or electric shock could result.
Wiring and installation must be done by a qualified eletrician.
∙ When mounting the device on a wall or ceiling, install the device in
a convenient location, but not where it could be jarred or bumped.
Injury could result.
∙ On devices with ground terminals, connect to an earth ground.
Otherwise fire or malfunction could result.
∙ On devices with plastic or real glass, do not put high pressure on
the glass. If fractured, injury could result.
∙ On devices with LCD, if LCD is punctured, do not allow contact
with the liquid crystal inside. Injury could result. If necessary, gargle
your mouth and clean your eyes or skin with clear water for at least
15 minutes and consult your doctor.
∙ Do not put anything on the device or cover the device with cloth,
silicone, glue, coating, separate covering etc. Fire or device issues
could result.
∙ Do not install the device in any of the following locations. Fire, electric
shock, or device trouble could result.
- Places under direct sunlight or places near heating equipment that
varies in temperature.
- Places subject to dust, oil, chemicals, hydrogen sulfide (hot spring).
- Places subject to moisture and humidity extremes, such as bathrooms,
cellars, greenhouses, etc.
- Places where the temperature is very low, such as inside a refrigerated
area or in front of an air conditioner.
- Places subject to steam or smoke (e.g. near heating or cooking surfaces).
- Where noise generating devices such as dimmer switches or inverter
electrical appliances are closeby.
- Locations subject to frequent vibration or impact.
5