Filling The Water Tank - TM Electron TMPPL020 Manual De Instrucciones

Frame

FILLING THE WATER TANK

1. Place the steamer on its base on a stable surface.
2. Hold the handle to stabilize and pull out the removable water tank with
the other hand (C).
3. Gently pull out the rubber water tank cover at the top of the tank (D).
TIP: Using distilled, purified, or filtered water is highly recommended and
will reduce mineral buildup. do not use oils, perfumes, or scented additives.
4. Using a clean measuring cup, pour water into opening until water reaches
the "MAX" level mark on the top of the tank (E). Do not overfill. Close the
rubber cover securely.
5. Dry off any excess water from the tank. Push water tank back into the
steamer base click into place.
6. To refill at any time during use, turn steamer off by pressing the power
button until the blue indicator light is off, unplug from outlet, and follow the
above procedure.
Tie: After feiling alo to reheat for 45 seconds and then prime pump by hol-
ding steam trigger until steam forms.
10
1
A
Usage
Garment Care Label: For any garments that call for me-
dium to high heat and allow for use of steam.
Tip:Frame helps remove lint, hair, and animal fur.
ENGLISH
B