Using The Handleld Steamer - TM Electron TMPPL020 Manual De Instrucciones

C
USING THE HANDHELD STEAMER
1. Read the manufacturers fabric label to make sure the fabrics are suitable
for steaming.
• If you see "do not iron" or this icon
against the garment. instead attach the delicate fabric frame and make
sure to test on an inconspicuous area prior to steaming the entire
garment.
• If you see "do not steam" or this icon
ment.
2. Refer to the "Attaching Frames" section for determining whether to use a
frame. Attach or remove frames while the steamer and frames are cool.
3. Plug the steamer into an outlet and then press the power button (F).
The blue power button light will slowly blink, indicating that the steamer is
heating.
4. After about 35 seconds the power light will stay on, indicating the steamer
is preheated.
5. Prime the water pump by holding steam trigger until steam forms.
6. To generate steam, press down on the steam trigger with your index
finger (G) as long as the trigger is held down, steam will emit from the stea-
mer. When the trigger is released, the steam will stop.
D
ENGLISH
E
, do not press the plate
, do not steam the gar-
11