TM Electron TMPPL020 Manual De Instrucciones página 12

• To generate a constant flow of steam without holding the trigger, press
the steam trigger and then slide the continuous steam switch down (H)
this will activate the continuous steam feature. To turn the steam off,
press the trigger, push the continuous steam witch up and then release
trigger.
Note: It is normal to feel of hear the water pump in the handle.
7. To iron using the plate with the ironing pad, start steaming and then lightly
press the metal plate against the garment on the ironing pad (M). Drag the
plate up and down the fabric, being careful to keep hands away from the
steam and never leaving the plate in one section for too long; similar to how
an iron is used.
Note: If the steamer is left inactive, the auto shut-off feature will activate,
indicated by the rapidly blinking. Power button. to resume steaming after the
auto shut-off is activated, either press the steam trigger or press the power
button. Allow the steamer to preheat if needed.
8. When finished steaming press and hold the power button until its blue
light turns off and unplug from outlet.
9. Stand steamer on its base and allow it to completely cool off before sto-
ring to avoid mineral buildup, empty the tank after each use.
F
12
G
ENGLISH
H M