Chapter 1. General Technical Characteristics - gala gar GALA MIG 3000 Manual Técnico De Instrucciones

1. GENERAL DESCRIPTION. TECHNICAL CHARACTERISTICS.
The GALA MIG line equipment permits carrying out electrical welding by means of MIG-MAG semi-
automatic procedure with carbon steels, weakly alloyed steels, stainless and aluminium steels, which are the
most commonly used metals in modern industry.
The GALA MIG line is characterised because its wire feed unit is separate from the power source (wire-feed unit). This
system makes it easier to move the equipment to different industrial work locations.
The whole modular system that makes up the installation comprises the following elements:
1.1 – Power source. (Earth cable included).
1.2 - Wire feed unit (Independent from the power source).
1.3 - Connection extension lead between power source and wire-feed unit. Welding torch.
1.4 - Transport trolley (compulsory if a cooling module is installed) or bottle support.
1.5 - Auxiliary elements: Pressure reducing valve for gas bottle, gas economiser.
General description of the series equipment:
GALA MIG 3000/3800
have a high duty cycle. 10 and 20 regulation positions respectively.
1.1. GALA MIG POWER SOURCES.
Input voltage U
Maximum input intensity I
Effective input intensity I
Continuous adjustment margin I
Welding intensity equivalent to 35%.
Maximum welding intensity I
Welding voltage U
Number of staggerings U
Number of reactance taps
V-I parameter measurement system
Thermal insulation.
Mechanical protection index – IP class
Ventilation
Total dimensions (
Weight (without wire-feed).
ACCORDING TO EN 60974 4-1; (1) OTHER FREQUENCY AND POWER SUPPLY VOLTAGE VALUES ON DEMAND.
S – Appropriate welding equipment for welding work in places with limited mobility.
GALA MIG 3000/3800.
. Designed for use in highly professional welding work in locksmith work and boilerwork. They
NEVER USE THESE WELDING MACHINES TO DEFROST TUBES.
Technical characteristics of GALA MIG power sources.
TECHNICAL CHARACTERISTICS.
(3 Ph. -50/60hz) (1)
1
1max
1eff
2min
.
2max
- U .
2min 2max
2
) mm.
Dimensions of GALA MIG 3000/3800 equipment.
556
Ref. 43898000
GALA MIG 3000 GALA MIG 3800
230/400V
23/13 A
18/10 A
÷ I 30 ÷230 A
2max
300 A
230 A / 60 %
17,5-37V
10
1
OPTIONAL
H (180º C)
IP 21
FORCED
705x556x900
79 Kg
900
Ref. 43990000
230/400V
31/18 A
24/14 A
35 ÷300 A
390 A
300 A / 60 %
18-39V
10 X 2
1
OPTIONAL
H (180º C)
IP 21
FORCED
705x556x900
96 Kg
15