Tabla de contenido
Publicidad
Belt
Courroie
Correa
Motor Shaft
Arbre d'entraînment
du moteur
Eje del motor
+
Groove
Ouverture
Ranura
Replacing Belt
Agitator
Agitateur
Agitador
End Cap
Bouchon
Tapa del extremo
Cleaning Agitator
Remove worn or broken belt.
Loop new belt (Panasonic Type UB8
only) around motor shaft and belt
pulley; see illustration for correct belt
routing.
Reinstall agitator back into nozzle
housing grooves.
After reinstalling the agitator, turn it
by hand to make sure that belt is not
twisted or pinched and that all
rotating parts turn freely.
Reinstall lower plate.
Clean agitator after every five uses
and every time the belt is replaced.
Remove lower plate.
Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors.
Remove agitator.
Remove any string or debris located
on the end caps.
Reinstall agitator and lower plate.
- 26 -
Publicidad
Tabla de contenido
