Medela Harmony Instrucciones página 5

Harmony Disassembly
™
5. Remove white membrane
(E) from yellow valve (F).
Harmony Assembly
1. Snap white membrane (E)
button into small opening
on yellow valve (F) until
membrane lies completely
flat on valve. (Both parts
should be completely dry
before assembly.)
2. Push yellow valve (F)
securely onto inner ring of
pump body (D).
3. Screw bottle (G) onto pump
body (D).
6
(continued)
4. If the handle components
(A & B) have been
disassembled: place the
oval shaped base of the
stem into the diaphragm (B).
Hint: Make sure the oval
shape is lined up correctly
in the diaphragm.
5. Place silicone diaphragm/
stem (B) into pump handle
(A) and press down firmly
around entire edge to ensure
proper seal. The lines on the
diaphragm should line up
with the yellow dots on the
handle.
6. Insert stem of handle
assembly into opening on
top of pump body (D) and
push until you feel it snap in.
7. Insert PersonalFit
™
breastshield (C) into
top opening on
pump body (D).
Correct Incorrect
7