Advanced Programming Options - Graef ES 80 Manual De Instrucciones

Espresso Machine ES 80 / ES 81
Advanced Program-
ming Options
EN
Espresso Thermoblock
Temperature
The water temperature of this
unit has been calibrated to pre-
cise temperature of 92°C at the
group head. The temperature of
the water at the group head can
be modified in increments of 2°C
up and down should it be desi-
red.
To do this you need to follow the
instructions below:
Press the "COFFEE" button for 3
seconds. While still holding down
the "COFFEE"button briefly press
the "POWER" button and re-
lease. Release "COFFEE"button.
This activates the programmabi-
lity of the Espresso Temperature
and to signal this, the unit will
output the current setting with a
sequence fo beeps.
Beep Sequence
3 short Beeps
2 short Beeps
1 short Beep
1 short und 1
long Beep
1 long Beep
2 long Beeps
3 long Beeps
42
Setting
+ 3
+ 2
+ 1
Factory Setting
- 1
- 2
- 3
important!
The lights behind
"STEAM" and "HOT WA-
TER" buttons will start flas-
hing.
Within 30 seconds press and re-
lease one of the flashing buttons
depending on the required tem-
perature adjustment.
Up (+) a setting : Press "HOT WA-
TER"
Down (-) a setting : Press
"STEAM"
important!
When you have selected a
new temperature setting the
unit will sound a sequence
of beeps to indicate the new
temperature setting.
To save your settings press and
hold down the "COFFEE" button
for 3 seconds. A single long beep
will sound to indicate your set-
tings have been saved.
important!
The unit will then automa-
tically power on and begin
heating up.
The unit will stay in pro-
gramming mode for up to
30 seconds. If you do not se-
lect a new temperature set-
ting within 30 seconds the
programm will automatically
return to the Factory Setting
and the unit will the power
on and begin heating up.
the