Graef ES 80 Manual De Instrucciones página 43

Espresso Machine ES 80 / ES 81
Steam Thermoblock Tem-
perature
The steam temperature of this
unit has been calibrated to deli-
ver a powerful and dry steam for
texturing milk. The temperature
of the steam can be modified in
increments of 3°C up and down
should it be desired.
To do this you need to follow the
instructions below:
Press the "STEAM" button for 3
seconds.
While still holding down the
"STEAM"button briefly press the
"POWER" button and release.
Release "STEAM"button.
This activates the programma-
bility of the Steam Temperature
and to signal this, the unit will
output the current setting with a
sequence fo beeps.
Beep Sequenze
3 short Beeps
2 short Beeps
1 short Beep
1 short und 1
long Beep
1 long Beep
2 long Beeps
3 long Beeps
Setting
+ 3
+ 2
+ 1
Factory Setting
- 1
- 2
- 3
© Gebr. Graef GmbH & Co. KG - 03
important!
The lights behind the "COF-
FEE" and "HOT WATER"
buttons will start flashing.
Within 30 seconds press and re-
lease one of the flashing buttons
depending on the required tem-
perature adjustment.
Up (+) a setting : Press "HOT WA-
TER"
Down (-) a setting : Press "COF-
FEE"
important!
When you have selected a
new temperature setting the
unit will sound a sequence
of beeps to indicate the new
temperature setting.
To save your settings press and
hold down the "STEAM" button
for 3 seconds. A single long beep
will sound to indicate your set-
tings have been saved.
important!
The unit will then automa-
tically power on and begin
heating up.
The unit will stay in pro-
gramming mode for up to
30 seconds. If you do not se-
lect a new temperature set-
ting within 30 seconds the
programm will automatically
return to the Factory Setting
and the unit will the power
on and begin heating up.
EN
43