Safety Precautions - nardi HB21TSSAA Manual De Funcionamiento

Safety Precautions

Power supply: AC 220V-240V/5OHZ
If the voltage fluctuates violently (beyond 187-
242V), it is necessary to use a voltage stabilizer of
750W or above to prevent startup failure, damage
to the control board or compressor, or unusual
noises.
Be careful not to damage the power cord. Hold the
plug, not the electric cable, when disconnecting
the appliance from the outlet. Place the power
cord in such a way as to eliminate the risk of
damage caused by the refrigerator's weight.
Be careful not to damage the power cord when
moving the appliance.
When there is a gas leak
Turn off the gas valve.
Open the doors and windows for ventilation.
Do not plug or unplug the refrigerator or other
electric appliances.
The appliance must be plugged into a dedicated
outlet that is securely grounded. The power cord
of this appliance is fitted with a three-prong plug
(grounded) that complies with the standard three-
prong outlet (grounded). Never cut off or remove
the third prong. The refrigerator should be located
so that the plug is accessible. VVARNING! The
plug should be securely connected to the socket
to prevent fire hazards.
When the power cord is damaged
The use of a damaged cord or plug is strictly
prohibited. If the power cord is damaged, it should
be replaced at an authorized service center.
Always remember to unplug the appliance in the
following cases:
Unplug the appliance before cleaning and
reparation.
Unplug the appliance before replacing the old light
bulb to prevent electric shock.