Location - nardi HB21TSSAA Manual De Funcionamiento

Location

Leveling
The appliance should stand firmly on a solid floor.
To support it, use firm and solid, non-flammable
pads. Never use the packaging materials for
support. Level the appliance using the adjustable
legs whenever necessary. Turn clockwise to raise
the refrigerator, and anticlockwise to lower it.
Do not expose the appliance to rain and moisture.
Keep the appliance dry and clean.
The appliance should be placed in a well ventilated room. A minimum clearance of 10cm at both sides and
at the rear is required. If a built-in installation is needed, allow 25cm or more above the top surface of the
appliance and 5cm or more away from the walls, to enable proper air circulation.
Do not expose the appliance to direct sunlight or
sources of heat.
To prevent the risk of injury and accidents, do not
place heavy loads and water containers on top of
the refrigerator.