Safety; General Safety Instructions; Safety Instructions For Operation - Zenoah GZ3500T Manual De Usuario

General safety instructions

WARNING: Read the warning instructions
that follow before you use the product.
• A chainsaw is a dangerous tool if used carelessly or
incorrectly and can cause serious injury or death. It
is very important that you read and understand the
contents of this operator's manual.
• Under no circumstances may the design of the
product be modified without the permission of the
manufacturer. Do not use a product that appears to
have been modified by others and always use
original accessories. Non-authorized modifications
and/or accessories can result in serious personal
injury or the death of the operator or others.
• The inside of the muffler contain chemicals that may
be carcinogenic. Avoid contact with these elements
in the event of a damaged muffler.
• Long term inhalation of the engine's exhaust fumes,
chain oil mist and dust from sawdust can represent a
health risk.
• This product produces an electromagnetic field
during operation. This field may under some
circumstances interfere with active or passive
medical implants. To reduce the risk of serious or
fatal injury, we recommend persons with medical
implants to consult their physician and the medical
implant manufacturer before operating this product.
• The information in this operator's manual is never a
substitute for professional skills and experience. If
you get into a situation where you feel unsafe, stop
and seek expert advice. Contact your servicing
dealer or an experienced chainsaw user. Do not
attempt any task that you feel unsure of!

Safety instructions for operation

WARNING: Read the warning instructions
that follow before you use the product.
• This top handle chainsaw is designed specifically for
tree surgery and maintenance in the tree. Due to the
special compact handle design (closely spaced
handles), there is an increased risk of losing control.
For this reason these special chainsaws should be
used only for work in a tree by persons who are
trained in special cutting and working techniques and
who are properly secured (lift bucket, ropes, safety
harness). Regular chainsaws (with wider spaced
handles) are recommended for all other cutting work
at ground level.
• Working in a tree requires the use of special cutting
and working techniques which must be observed in
4

Safety

order to reduce the increased risk of personal injury.
Never work in a tree unless you have received
specific, professional training for such work,
including training in the use of safety and other
climbing equipment, such as harnesses, ropes,
belts, climbing irons, snap hooks, carabiners,
etcetera.
• Never cut with the kickback zone at the tip of the
chainsaw guide bar.
• Never attempt to catch falling sections or cut in the
tree when he/she is only secured with one rope.
Always use two secured lines.
• During critical felling operations, hearing protectors
should be lifted immediately when the sawing is
completed so that sounds and warning signals can
be heard.
• Before using a chainsaw you must understand the
effects of kickback and how to avoid them. See
instructions under the heading
page 18 .
• Never use a product that is faulty. Carry out the
safety checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. See instructions under
Maintenance on page 20
• Never use a product with visible damage to the
spark plug guard and ignition cable. A risk of
sparking arises, which can cause a fire.
• Never use the product if you are fatigued, while
under the influence of alcohol or drugs, medication
or anything that could affect your vision, alertness,
coordination or judgement.
• Do not use the product in bad weather such as
dense fog, heavy rain, strong wind, intense cold,
etcetera. Working in bad weather is tiring and often
brings added risks, such as icy ground,
unpredictable felling direction, etcetera.
• Faulty cutting equipment or the wrong combination
of guide bar and saw chain increases the risk of
kickback! Only use the guide bar and saw chain
combinations we recommend, and follow the filing
instructions. See instructions under
page 34
• Never start a chainsaw unless the bar, saw chain
and all covers are fitted correctly. See instructions
under the heading
What is kickback? on
Accessories on
Assembly on page 12 . Without a
308 - 004 - 27.09.2017