Yakima EXO GearLocker Manual De Instrucciones página 2

1
PREPARE YOUR EXO SYSTEM.
NOTE: If you are installing EXO GearLocker™ on the EXO
TopShelf™ skip to step 2.
A. To extend the arms, first extend the driver-side arm by pulling
the pin and swinging it outward until the arm locks into place.
B. Then pull the pin for the passenger-side arm and extend it
until it locks into place.
A
2
LOOSEN THE KNOBS.
First, push the
pin next to the
knobs to the
unlocked position.
Completely
loosen the knobs
by turning them
counter-clockwise
until they no
longer turn.
WARNING: If your vehicle's exhaust is pointed directly at the EXO
GearLocker and is within 12" when installed, it is possible that the
heat from the exhaust could melt or damage the EXO GearLocker and
its contents. Use the EXO system at your own risk in this scenario.
Please contact Yakima's customer service department for additional
details and some recommendations on how to mitigate the issue.
Instruction #1036034A - page 2 of 6
3
Unlocked
Déverrouillé • Desbloqueado
2X 2X
INSTALLATION
ATTACH THE EXO GEARLOCKER™ TO THE ARMS.
A
A. Lift and tilt the rear of the box slightly as you slide it into the
track of the EXO System's arms.
B. Lower the front of the EXO GearLocker into the track.
C. Tighten knobs completely and lock them with the key.
D. Press the locking pins to lock the knobs.
E. Verify installation by trying to lift up on the EXO GearLocker.
CAUTION: Keep your
fingers away from
ALL moving parts!
B
C
B
Locked
Verrouillé • Bloqueado
D