tuctuc spire I-SIZE Intrucciones De Uso página 76

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

INSTALLATION OF THE CHILD SAFETY SEAT
1. ADJUSTING THE SHOCK BAR
1.1 Place the child safety seat facing backwards(in the direction of travel) on a vehicle
seat which has been approved for use.
1.2 Press the adjustment handle on the shock bar down with one hand and use the
other hand to pull the shock bar up at the same time, until it unlocks.
1.3 Adjust the angle of the shock bar to the angle of your vehicle seat backrest so
the shock bar engages with a clicking sound.
2. PREPARING THE ISOFIX
2.1 slide the two locking arms until the ISOFIX locking arms are fully extended.
2.2 Push the green safety button and the red release button on both sides of the
seat towards each other . This ensures that both hooks on the ISOFIX locking arms
are open and ready to use.
3. FASTENING THE ISOFIX
3.1 Position the two ISOFIX locking arms directly in front of the two insertion aids.
3.2 Push both ISOFIX locking arms into the insertion aids until the ISOFIX locking
arms engage on both sides with a clicking sound.
DANGER ! The green safety button must be visible on both sides so that the child
safety seat is correctly fastened.
4. PUSHING THE CHILD SAFETY SEAT ON SECURELY
Push the child safety seat as far as possible towards the vehicle seat backrest.
5. CHECKING THE FASTENING
Shake the child safety seat to ensure that it is securely fastened and check the safety
buttons to make sure that the two indicators are fully green.
6. INSTALLING THE SUPPORT LEG
6.1 Pull the support leg away from the back of the child safety seat until you hear a
click and the support leg is fully extended. The red marking must not be visible any
more.
6.2 Push both adjustment buttons and pull out the support leg until it rests firmly on
the floor of the vehicle. The indicator on the support leg must be fully green and the
two adjustment buttons must engage with a clicking sound.
DANGER ! The support leg must never be suspended in mid-air or supported by other
objects. Make sure that the support leg does not lift the DUALFIX i-SIZE bottom
section up from the surface of the vehicle seat.
76

Publicidad

Tabla de contenido
loading

Productos relacionados para tuctuc spire I-SIZE

Tabla de contenido