C) Battery Charging - Breitling COCKPIT B50 Manual Del Usuario

longer than this, the information will be lost and the watch will have to be reset.
The watch must be charged to exit sleep mode.
Once the charge begins, the hands and various indicators (
be updated. If there is too long a time lapse before recharging the watch, a
complete reset will be required (see chapter 3).
NB: Depending on how the watch is used (high energy-consuming functions), as
well as environmental conditions (ambient temperature), the moment the 1st level
appears, as well as the duration of levels 1 and 2 may vary.
function will at any time display the battery charge.
The
BATTERy
A battery change will only be required after around 300 complete charges, or after
more than 10 years of use. This may only be done by an authorized Breitling service
center.

c) Battery charging

After purchasing, we recommend completely charging the battery prior to
any handling. In order to do this, the watch must be connected to the cable
supplied, following which the cable itself must be connected to the USB power
adaptor also supplied (see figure 1). The connector is equipped with a magnet
guaranteeing the contact and a mechanical alignment system. As soon as the
contact is made, the watch confirms with a beep sound and a luminous flash
on the LCD display. If the hands were stopped, they will adjust to the right time
and the word
CHARGE
will appear in the upper screen.
16
, , etc.) will
TIME DATE