N.B.: When in setting mode (
from 0. The seconds counter will only stop when the seconds are changed
manually. In this case, it restarts when exiting setting (putting the crown back
to neutral position 1). The seconds are automatically synchronized with the
and
zones.
TIME 2
5. SETTING THE DATE (
• Select the
TIME
• Pull the crown into position 2.
• Press P2 until the date,
• Select the display mode for the date by turning the crown:
(day and then month) or
DD/MM
P2. The year flashes (
• Define the year by turning the crown and confirm by pressing P2. The month
flashes (
MONTH
• Define the month by turning the crown and confirm by pressing P2. The day
flashes (
appears in the upper screen).
DAy
• Define the day by rotating the crown and confirm by pressing P2.
SET UTC
)
SETDATE
mode.
SETDATE
appears in the upper screen).
yEAR
appears in the upper screen).
), pressing P1 will restart the seconds counter
, appears in the upper screen.
(month and day) and confirm by pressing
MM/DD
21
TIME