•
Confirm by pressing P2; the first digit of the distance value will flash.
•
Select the units, the tens and then the hundreds for the distance by turning the
crown, confirming each time by pressing P2.
•
Press the crown back to neutral position 1.
g) Synchronizing the seconds hand
If the seconds hand does not position itself exactly on 0 in
as follows:
•
Pull the crown into position 2
•
Press P1 to activate synchronization of the hand (
•
Turn the crown to reposition the hand on 0 (
•
Press the crown into neutral position 1.
11. LAP TIMER CHRONOGRAPH (
The lap timer chronograph makes it possible to record several times one after
the other. When the recording stops, the next one starts automatically. 20 times
can be stored and reread once the recording has finished. If more than 20 times
are recorded, the active recording will automatically replace the preceding 20
recording.
HAND
)
LAP TMR
38
mode, proceed
CHR ADD
)
SyNCHRO
)
00
th