Using The Comb Attachment - Panasonic ER‑GB37 Instrucciones De Funcionamiento

Recortador de cabello/barba recargable
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 79
Notes
• You cannot operate the trimmer while charging.
• If there is noise from the radio or other sources
while using or charging the appliance, move to a
different location to use the appliance.
• To keep charging the battery will not affect battery
performance.
• You can charge the battery before it is completely
discharged. However, it is recommended to
charge when the battery is completely discharged.
The battery life depends strongly on factors such
as how it is used and stored.
• Recommended ambient temperature for charging
is 0 °C – 35 °C. Battery performance may decrease
outside of the recommended temperature.
• A full charge supplies enough power for
approximately 40 minutes of use.
(Based on dry using at 20 °C – 30 °C)
The operating time may differ depending on the
frequency of use and the operating method.
• When the appliance is charged for the first time
or it has not been in use for more than 6 months,
the charging time may change or the charge
indicator lamp may not glow in the first few
minutes. In addition, the operating time may
become shorter. Please charge it for more than
18 hours in such cases.
• When the appliance is not used for 6 months or
more, the battery will weaken (leak battery fluid
etc.). Fully charge the battery once every
6 months.

Using the comb attachment

• Make sure that the main body is turned off.
Turn the dial to the "1" position.
1
1
Mount the comb attachment to
2
2
the main body until it clicks.
Turn the dial to the desired indicator (between
3
3
1 mm and 10 mm).
Trimming height
1 1.5 2 2.5 3 3.5 4 4.5 5 5.5
(mm) (approx.)
Indicator
1 1.5 2 2.5 3 3.5 4 4.5 5 5.5
Trimming height
6 6.5 7 7.5 8 8.5 9 9.5 10
(mm) (approx.)
Indicator
6 6.5 7 7.5 8 8.5 9 9.5 10
• When trimming a short beard, it is effective to
increase the number of trimming times in order to
keep the beard uniform at the desirable length.
• It can also be used without the comb attachment.
(Trimming height: approx. 0.5 mm)
• Actual beard length will be a little longer than the
height you set.
11

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido