Labormat Th / Usa - Dreve LABORMAT SD Instrucción

Labormat TH
4.3 Labormat TH
In accordance with the Low-Voltage Directive (2006/95/EG)
We hereby declare that the device outlined below complies with the basic safety and health
requirements of the EU Directives in terms of its design and construction as well as the ver-
sion placed on the market by us.
This declaration shall not apply in the event of modifications made to the machine without
our approval.
Machine designation:
Labormat TH (D3603N)
Device type: Tabletop boil-out unit
Applicable EG Directives:
2006/95/EG Low-Voltage Directive
2004/108/EG EMC Directive
Applied harmonised standards:
2006/95/EG Low-Voltage Directive
EN 61010-1: 2010 Safety requirements for electrical equipment for measurement,
control and laboratory use; Part 1: General requirements
(IEC 61010-1: 2010 + Corrigendum to 2011); German version
EN 61010-1:2010.
EN 61010-2-010: 2003 Safety requirements for electrical equipment for measurement,
control and laboratory use; Part 2-010: Particular requirements
for laboratory equipment for the heating of materials (IEC 61010-
2-010: 2003); German version EN 61010-2-010:2003).
2004/108/EG EMC Directive
EN 61000-3-2:2006 +
A1:2009 + A2:2009 Electromagnetic Compatibility (EMC) – Part 3-2: Limits –
Limits for harmonic current emissions (equipment input current
<= 16 A per phase) (lEC 61000-3-2:2005 + A1:2008 + A2:2009);
German version EN 61000-3-2:2006 + A1:2009 + A2:2009.
EN 61000-3-3:2008 Electromagnetic Compatibility (EMC) – Part 3-3: Limits – Limitation
of voltage changes, voltage fluctuations and flicker in public
low-voltage supply systems for equipment with rated current
<=16 A per phase and not subject to conditional connection
(IEC 61000-1:2008); German version EN 61000-3-3:2008.
EN 61326-1:2006 Electrical equipment for measurement, control and laboratory
use – EMC requirements. Part 1: General requirements
(IEC 61326-1:2005); German version EN 61326-1:2006.
Emissions by residential area, commercial area and small
businesses; interference immunity by industrial area.
EN 55014-1S Measuring interference voltage in accordance with EN 55014-
1:2006, frequency range 150 kHz–30 MHz, conducted, specific
evaluation of pops.
Dreve Dentamid GmbH
Max-Planck-Straße 31 · 59423 Unna/Germany · Tel.: +49 2303 8807-0
Fax: +49 2303 8807-55 · dentamid@dreve.de · www.dreve.com/dentamid
42

4.4 Labormat TH / USA

In accordance with the Low-Voltage Directive (2006/95/EG)
We hereby declare that the device outlined below complies with the basic safety and health
requirements of the EU Directives in terms of its design and construction as well as the ver-
sion placed on the market by us.
This declaration shall not apply in the event of modifications made to the machine without
our approval.
Machine designation:
Labormat TH (D3603NUSA)
Device type: Tabletop boil-out unit
Applicable EG Directives:
2006/95/EG Low-Voltage Directive
2004/108/EG EMC Directive
Applied harmonised standards:
2006/95/EG Low-Voltage Directive
EN 61010-1: 2010 Safety requirements for electrical equipment for measurement,
control and laboratory use; Part 1: General requirements
(IEC 61010-1: 2010 + Corrigendum to 2011); German version
EN 61010-1:2010.
EN 61010-2-010: 2003 Safety requirements for electrical equipment for measurement,
control and laboratory use; Part 2-010: Particular requirements
for laboratory equipment for the heating of materials (IEC 61010-
2-010: 2003); German version EN 61010-2-010:2003).
2004/108/EG EMC Directive
EN 61000-3-2:2006 +
A1:2009 + A2:2009 Electromagnetic Compatibility (EMC) – Part 3-2: Limits –
Limits for harmonic current emissions (equipment input current
<= 16 A per phase) (lEC 61000-3-2:2005 + A1:2008 + A2:2009);
German version EN 61000-3-2:2006 + A1:2009 + A2:2009.
EN 61000-3-3:2008 Electromagnetic Compatibility (EMC) – Part 3-3: Limits – Limitation
of voltage changes, voltage fluctuations and flicker in public
low-voltage supply systems for equipment with rated current
<=16 A per phase and not subject to conditional connection
(IEC 61000-1:2008); German version EN 61000-3-3:2008.
EN 61326-1:2006 Electrical equipment for measurement, control and laboratory
use - EMC requirements. Part 1: General requirements
(IEC 61326-1:2005); German version EN 61326-1:2006.
Emissions by residential area, commercial area and small
businesses; interference immunity by industrial area.
EN 55014-1S Measuring interference voltage in accordance with EN 55014-
1:2006, frequency range 150 kHz–30 MHz, conducted, specific
evaluation of pops.
Dreve Dentamid GmbH
Max-Planck-Straße 31 · 59423 Unna/Germany · Tel.: +49 2303 8807-0
Fax: +49 2303 8807-55 · dentamid@dreve.de · www.dreve.com/dentamid
43