DBI SALA Delta Vest Manual Del Usuario página 28

5.0 INSPECTION
5.1 The i-Safe™ RFID tag on this harness can be used in conjunction
with the i-Safe handheld reading device and the web based portal
to simplify inspection and inventory control and provide records for
your fall protection equipment See Figure 22.
5.2 FREQUENCY: Before each use inspect the full body harness
according to sections 5.3 and 5.4. The harness must be inspected
by a competent person, other than the user, at least annually.
Record the results of each formal inspection in the inspection and
maintenance log in section 9.0, or use the i-Safe™ inspection
web portal to maintain your inspection records. If you are a fi rst-
time user, contact a Customer Service representative in the US
at 800-328-6146 or in Canada at 800-387-7484 or if you have
already registered, go to: www.capitalsafety.com/isafe.html. Follow
instructions provided with your i-Safe handheld reader or on the
web portal to transfer your data to your web log.
i-Safe
RFID Tag
Labels
Detail of Label Packet with
i-Safe RFID Tag
IMPORTANT: If the full body harness has been subjected to fall
arrest or impact forces it must be immediately removed from service
and destroyed.
IMPORTANT: Extreme working conditions (harsh environments,
prolonged use, etc.) may require increasing the frequency of inspections.
Figure 22 - i-Safe™ RFID Tag
Wrap
around
cover
28