Cleaning And Maintenance; Dimensions And Specifications - Brod & Taylor FP-105 Manual De Instrucciones

Prepare for Storage
Turn the Proofer OFF and allow it to cool. (Removing the lid will allow it to cool more
quickly.) Unplug power cord from the wall receptacle and the Proofer.
Remove the wire rack and water tray, if in use. If necessary, wipe surfaces of the
Proofer with a cloth to remove any water residue. Make sure the Proofer is dry before
folding for storage. Lift the expanding box section slightly from the front, then fold by
pushing gently in on the sides and folding the unit towards the back. Lower the folded
section into the base while attached to rear hinge. Place the water tray into the front
section of the base. Orient the wire rack with feet up (A). The open crosses shown
in (B) hold the wire rack securely in place. Remove the power cord from the Proofer.
Close the lid and press on the front to ensure that the latch is engaged.
A

Cleaning and Maintenance

• This appliance is virtually maintenance free and has no user serviceable parts. If
the appliance is damaged or does not operate properly, contact Brod & Taylor for
repair: contact@brodandtaylor.com
• Always unplug and completely cool down before cleaning.
• If necessary, wipe the housing and metal base plate with a damp cloth or
moistened with a mild detergent solution. Do not use chemical or abrasive cleaners
or polishers.
• Do not immerse the appliance in water or place it under running water.
• After cleaning, wait until completely dry before folding up.

Dimensions and Specifications

Inside box (open):
Outside body (open):
Outside body (closed):
Temperature range:
Model FP-105 Voltage:120V~ 60Hz (200W)
Model FP-205 Voltage: 220-240V~ 50Hz (180-220W)
B
15" x 12.5" x 8" high
18" x 14.5" x 10.5" high
18" x 14.5" x 2.5" high
70 - 195
°F
37.5 x 32 x 20 cm high
46 x 37 x 27 cm high
46 x 37 x 6.5 cm high
21 - 90 C
°
Page 5