Introduction
Your health care professional has determined that supplemental oxygen is of benefit
to you and has prescribed an oxygen concentrator set at a specific flow setting
to meet your needs. DO NOT change the flow settings unless your health care
professional tells you to do so. The Millennium M10 oxygen concentrator is intended
to provide supplemental oxygen to persons requiring oxygen therapy. This device
is not intended to be life supporting or life sustaining. The Millennium produces
concentrated oxygen from room air for delivery to a patient requiring low flow
oxygen therapy. The oxygen from the air is concentrated using a molecular sieve and
a pressure swing absorption process. Your home care provider will show you how to
operate the concentrator and will be available to answer any questions. You should
contact him or her in the future if you have any questions or problems.
Millennium M10 models that are compatible with the UltraFill Oxygen Filling Station
will include an additional connection port for connection to the UltraFill Oxygen
Filling Station. The performance of the Millennium M10 is not affected when the
port is connected to the UltraFill Oxygen Filling Station. The port is for connection
to the UltraFill Oxygen Filling Station only and not for connecting the patient
oxygen cannula. The patient oxygen cannula is connected to the Millennium M10
as described in the Operating Instructions section in this manual. Please see the
UltraFill manual for connection and operating instructions regarding the UltraFill
Oxygen Filling Station.
Parts of Your Concentrator
Flow Meter
UltraFill Port
Air Filter
Filter Cap
5
On/Off
Switch
Operating
Condition
Indicators
Oxygen
Outlet Port