Respironics Millennium M10 Manual Del Paciente página 9

4. Press the power switch to the On [ I ] position. Initially, all the indicator lights
will turn on and the audible alarm will sound for a few seconds. After that time,
only the green indicator light should remain lit.
5. After turning on the oxygen concentrator, allow at least 10 minutes for it to
warm up.
6. Adjust the flow to the prescribed setting by turning the knob on the top of the
flow meter until the ball is centered on the line marking the specific flow rate.
7. Be sure oxygen is flowing through the cannula. If it is not, refer to the
Troubleshooting
8. Put the cannula on as directed by your home care provider.
9. When not using the device, press the power switch to the Off [O] position.
Accessory Equipment
Use only the following Philips Respironics accessories with the Millennium M10:
- Part Number 1014653
Contact your home care provider if you have questions concerning the use of these
accessories.
section.
Cannula and Tubing
8