Operating Guide - Spengler OXYSTART Manual Del Usario

7. Operating Guide

7.1 Insert the two batteries in the correct direction, then replace the cover.
7.2 Open the clip as shown in Figure 5.
7.3 Insert the patient's finger into the rubber cushions of the clip (make sure the finger is in the right position),
then clip the finger.
7.4 Press the switch button once on front panel.
7.5 Do not shake the finger and keep the patient at ease during the process. It is recommended that the pa-
tient stays still during this process.
7.6 Read the information directly from the display screen.
7.7 The button
device. When the device is powered on, press the button and quickly release to change the screen's orien-
tation. When the device is powered on, press and hold the button to change the screen's brightness.
The fingernail and luminescent tube should be on the same side.
42
Oxystart® - EN
has three functions.When the device is power off, press the button to open the
Figure 5. Put finger in position