Attach The Rail To The Header Bracket - Craftsman 139.53975SRT1 Manual Del Propietário

Header Wall
j Header Bracket
J
INSTALLATION STEP 3
Attach the Rail to the Header
Bracket
NOTE: (Optional) With an existing Craftsman
installation, you may re-use the old header bracket
with the two plastic spacers included in the hardware
bag. Place the spacers inside the bracket on each
side of the rail, as illustrated.
• Position the opener on the garage floor below the
header bracket. Use packing material as a
protective base. NOTE: If the door spring is in the
way you'll need help. Have someone hold the
opener securely on a temporary support to allow
the rail to clear the spring.
• Position the front rail end within the header bracket
and join with a 5/16"x1-1/2" clevis pin as shown.
• Insert a ring fastener to secure.
Spring
/
Mounting
Hole
Header Bracket
0
Mountinc
Hole
IPTION WITH
EXISTING CRAFTSMAN
INSTALLATION
Garage
Door
Opener Carton or
Temporary
Support
HARDWARE SHOWN ACTUAL SIZE
O
Clevis Pin 5/16"x1-1/2" Ring faslener
15