Using Your Lumineb Ii Compressor Nebulizer - Lumiscope LUMINEB II Instrucciones De Operación

USING YOUR LUMINEB II COMPRESSOR NEBULIZER:

Note: Prior to initial operation, the nebulizer should be thoroughly cleaned.
1 . Place your LUMINEB II on a flat and stable surface . Be sure that you can easily
reach the controls while you are seated .
2 . Gently twist the top part of the nebulizer
assembly counter-clockwise to
disassemble the nebulizer . (fig .1)
3 . Fill the bottom section of the nebulizer with the
medication prescribed by your physician . Be sure
that the nebulizer cone is put inside the bottom
section . (fig . 2)
4 . Replace the top part of the nebulizer and gently twist
clockwise to reassemble the nebulizer . Make sure both
sections are connected properly . (fig . 3)
5710-INS-LAB-RevB14
Figure 1
Figure 2
Figure 3
6