Lumiscope LUMINEB II Instrucciones De Operación página 7

5 . Attach one end of the air tube to the base of the nebulizer . (fig . 4)
6 . Attach the other end of the air tube to the air outlet on the top of the LUMINEB II .
(fig .4)
Figure 4
7. Attach the standard mouthpiece to the top
of nebulizer assembly . (fig . 5) If using an
optional mask, attach the mask to the top
of nebulizer assembly . (fig . 6)
8 . Make sure the On/Off switch is in the Off
position, then plug the power cord into an
electrical outlet .
9 . Flip On/Off switch to On position to begin
your prescribed treatment .
10 . When your treatment is finished, shut off
the LUMINEB II and unplug it from the
electrical outlet .
5710-INS-LAB-RevB14
Figure 5 Figure 6
7