General Description; Pumped Liquids - DAB GENIX VT Instrucciones De Instalación Y Mantenimiento

GB
ENGLISH
Safety
Use is allowed only if the electric system is in possession of safe-
ty precautions in accordance with the regulations in force in the
country where the product is installed.(for Italy CEI 64/2)
The power supply cable must never be used to carry or shift the
pump.
Never pull on the cable to detach the plug from the socket.
If the power cable is damaged, it must be replaced by the manu-
facturer or by their authorised technical assistance service, so as
to avoid any risk.
Failure to observe the warnings may create situations of risk for persons or
property and will void the product guarantee.
RESPONSIBILITY
The Manufacturer does not vouch for correct operation of
the electropumps or answer for any damage that they may
cause if they have been tampered with, modified and/or run
outside the recommended work range or in contrast with
other indications given in this manual.
The Manufacturer declines all responsibility for possible er-
rors in this instructions manual, if due to misprints or errors
in copying. The Manufacturer reserves the right to make any
modifications to products that it may consider necessary or
useful, without affecting their essential characteristics

GENERAL DESCRIPTION

Genix VT systems are compact small automatic lifting stations, suitable for
pumping domestic waste water, where evacuation by gravity is not possi-
ble.
The utilities connected to this system can be used normally and require
minimum maintenance.
The system will operate automatically as soon as the required level of
water enters the tank.
10
1. APPLICATIONS
Genix systems are indicated exclusively for the treatment of domestic
waste water from sinks, bathtubs, showers, or from washing machines
and dishwashers.
The product must be fastened to the floor to prevent uplift and turning.

2. PUMPED LIQUIDS

The product is only suitable for pumping wastewater from a cab-
inet shower, bidet and dishwashers. Not for heavy-duty public,
commercial or industrial use, and only for a limited number of
users.
Any damage due to foreign bodies (wet wipes, food, cotton wool,
tampons, hair, cotton cloths, wood, metal or plastic objects) or
due to pumping liquids such as solvents, strong chemical agents
and oil will not be covered by the guarantee.
Ordinary liquids for cleaning of the appliances connected. pH val-
ue: 4-10.
Maximum using temperature 90°C (for 30 min)
The product is sized for a maximum volume of 10 l litres and a
maximum inlet of 130 l/min.
3. INSTALLATION
The system must never be lifted by its power cable to carry it.
The product must be accessible for maintenance and repair.
The product must be placed in a frost-free room to prevent the
pumped liquid from freezing.
Make sure that all external pipework is adequately insulated.The
discharge pipe must be made of rigid material, such as copper,
or of rigid PVC with solvent-welded joints.To prevent the trans-
mission of vibrations to buildings, make sure that the pipework
is thoroughly fixed and that fittings cannot move and are not in
contact with building parts.
Make sure to affix the "WaterMark" and "Prohibited Items" stickers
in a clearly visible location of the device.