Vimar ELVOX EAM8 Manual Para El Conexionado Y El Uso página 8

EKKO
Contents: ................................................................................................................................................................................................................... Page
Product characteristics ...................................................................................................................................................................................................... 6
Technical data.................................................................................................................................................................................................................... 6
Limitations of use............................................................................................................................................................................................................... 6
Standard system set-up..................................................................................................................................................................................................... 7
Determination of the operator rotation pivot position ......................................................................................................................................................... 7
Installation of brackets and positioning of operator on the brackets.................................................................................................................................. 7
Operator release................................................................................................................................................................................................................ 7
Electrical connections ........................................................................................................................................................................................................ 7
User manual ...................................................................................................................................................................................................................... 8
The following safety information is an integral and essential part of the product and must be supplied to the user.
Read it carefully as it provides important guidelines regarding installation, use and maintenance. Always store this module carefully and transfer it to any
subsequent users of the system. Incorrect installation or improper use of the product may constitute a serious hazard.
SAFETY INSTRUCTIONS FOR INSTALLERS
- Carefully read the instructions on this leaflet: they give important information on the safety, use and maintenance of the installation.
- After removing the packing, check the integrity of the set. Packing components (plastic bags, expanded polystyrene etc.) are dangerous for children. In-
stallation must be carried out according to national safety regulations.
- Before connecting the set, ensure that the data on the label correspond to those of the mains.
- This apparatus must only be used for the purpose for which it was expressly designed, e.g. for automation systems for gates, garage doors and road bar-
riers. Any other use may be dangerous. The manufacturer is not responsible for damage caused by improper, erroneous or irrational use.
- Before cleaning or maintenance, disconnect the set.
- In the event of faults and/or malfunctions, disconnect from the power supply immediately by means of the switch and do not tamper with the apparatus.
- For repairs apply only to the technical assistance centre authorized by the manufacturer.
- Safety may be compromised if these instructions are disregarded.
- Installers must ensure that manuals with the above instructions are left on connected units after installation, for users' information.
- All items must only be used for the purposes designed.
- WARNING: to prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.
- This leaflet must always be enclosed with the equipment.
1. Product characteristics:
Linear 230 Vac operator with exterior mounting for residential and industrial swing gates with:
- aligned thrust
- customised key release and lever
- weldable, boltable and adjustable fixing brackets
2. Technical data
Description
Electric motor power supply
Electric motor maximum absorption
Electric motor maximum power
Maximum thrust
Maximum gate leaf length
Maximum gate leaf weight (at maximum length)
Maximum opening
Opening time
Protection rating
Operating temperature
Capacitor
Dimensions
Weight
Frequency of use
Useful travel
3. Limitations of use:
Length of gate leaf (metres)
1.5
2
2.5
3
3.5
4
6
Gate leaf weight (kg) EKKO 300A (EAM8)
580
380
250
200
-
-
EAM8.L/EAM8.R
230 Vac 50/60 Hz
2800 N
3 m
200 kg
min. 13sec. max 20 sec.
From -20 to +50°C
See fig. 2
5.7 kg
300 mm
Gate leaf weight (kg) EKKO 400A (EAM9)
-
-
450
320
240
200
EAM9.L/EAM9.R
1.1 A
240 W
4 m
110°
min. 16sec. max 27 sec.
IP54
8 μF
6 kg
50%
400 mm
EN