Furman IT-REFERENCE 7i Manual Delpropietario página 9

Specifications
AC Current Capacity:
Input: 7 Amp capacity required
Output: 7 Amp RMS (maximum, all outlets combined - continuous)
Linear Noise Attenuation:
Transverse (Differential) Mode
>40 dB from 10Khz. to 100 kHz.
>80 dB from 100 kHz. to 1GHz.
Linear attenuation curve from 0.05 – 100 ohms line impedance
Common Mode
>85 dB from10Hz. to 20 kHz.
>40 dB from 20kHz. to 1MHz.
Outlets:
4 (symmetrical balanced outlets)
Transient Voltage Surge Suppression:
120VAC Line
Series Multi-Stage - non-sacrificial with zero ground contamination
188V peak clamping @ 6000V 3000A input
Cable / Satellite
less than .1dB line loss
Shutdown Range
140 VAC +/- 3 VAC
Dimensions:
4" H x 17" W x 15.5" D (standard 2RU without feet)
Weight:
46 lbs.
Power Consumption:
8.5 Watts for display and control circuits independent of actual load
Safety Agency Listing:
ETL / C-ETL (Pending)