Hansgrohe Raindance E 04732 0 serie Instrucciones De Montaje página 7

Tabla de contenido

Publicidad

Roughing-in / Pièce intérieure / Piezas interiores
1
English
The Raindance E Showerpipe must
be installed with showerpipe rough
set 16181181 (not included).
To insure correct opera-
tion of the thermostatic
mixing valve, the hot
supply must be on the
left and the cold supply
must be on the right.
Turn the water off at the main.
Remove the spacing jig, nuts, and
plugs.
2
Français
Le Raindance E Showerpipe doit
être installé avec l'ensemble de
pièce intérieure pour tuyau de
douche 16181181 (non compris).
Pour vous assurer que
le mélangeur thermo-
statique fonctionne
correctement, installez la
conduite d'eau chaude
à gauche et la conduite
d'eau froide à droite.
Fermez l'eau à la valve principale.
Retirez le gabarit d'espacement,
les écrous et les bouchons.
1
2
3
Español
El Raindance E Showerpipe debe
ser instalado con un juego de
piezas interiores del tubo de ducha
16181181 (no incluido).
Para que la válvula
mezcladora termostática
funcione correctamente,
el suministro de agua
caliente debe estar a la
izquierda y el de agua
fría a la derecha.
Cierre el paso del agua en la en-
trada del suministro.
Retire la plantilla espaciadora, las
tuercas y los tapones.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido