Auriol AHFL 433 B2 Instrucciones De Uso página 112

NOTE
If no outdoor temperature and humidity is displayed within
around 3 minutes, the weather station will stop the reception
search. The reception symbol
are displayed on the outdoor display
It is possible that no signal can be received due to the sur-
rounding buildings or because the distance is too great.
If you are unable to establish an automatic connection to the
outdoor sensor, you can do this manually:
♦ Press and hold the
flashes on the outdoor display .
♦ Press the TX button
sensor radio signal.
The weather station automatically starts to receive the DCF signal
after 3 minutes, irrespective of whether the outdoor sensor
reception search has been successful or not. The reception
symbol flashes on the time panel . If the reception symbol
is not flashing completely ( ) on the display, this means that the
reception of the DCF signal is too weak and the time cannot be
synchronised. Try and find a set-up location in which the recep-
tion symbol ( ) flashes completely on the display.
If the DCF signal is successfully received, the current Central
European Time (CET) is displayed on the time panel . In
addition, the reception symbol
the time panel .
│ GB │ MT
■ 108
goes out, and
.
button until the reception signal
to manually initiate the outdoor
is permanently displayed on
and
AHFL 433 B2