Setting Descaling Signal; Setting The 'lItter Bin Full' Indication / Stop Function; Switch Off The 'lItter Bin Full' Indication; Fig. 17 Descaling Signal - BRAVILOR BONAMAT FreshOne Manual De Instrucciones

6.2.6

Setting descaling signal

D Press the programming key (19.4) to start the
programming.
D Press four times the [Enter] key (5.7).

Fig. 17 Descaling signal

D Set with the setting key (5.6 or 5.8) the
required value, taking the water hardness into
account (table 4 ).
D Press the programming key (19.4) to finish the
programming.
Position Signal after g
number of liters 5DH
OFF No signal
± 250 liter
1 18−30 32−55 hard
± 500 liter
2 12−18 22−32 rather hard
± 1000 liter
3 8−12 15−22 average
± 1500 liter
4 4− 8
± 2000 liter
5 0− 4
4,0 °DH = 0,714 mmol/liter
5,6 °DH = 1,000 mmol/liter
8,0 °DH = 1,429 mmol/liter
12,0 °DH = 2,143 mmol/liter
18,0 °DH = 3,214 mmol/liter
30,0 °DH = 5,357 mmol/liter
10,0 °TH = 1,000 mmol/liter
Table 4 Settings water hardness
TIP
− Inquire with your local waterworks about the
hardness of the water supplied and always
choose the correct setting. The default setting
of the machine is position 3.
The machine automatically records the number of
liters of water after each descaling cycle. When
the settings are incorrect and/or the descaling
sign on the display is ignored, the guarantee is no
longer valid!
ECopyright Bravilor Bonamat B.V.
Water hardness n
5TH
Description
− − −
7−15 soft
0− 7 very soft
6.2.7 Setting the 'litter bin full'
indication / stop function
D Press the programming key (19.4) to start the
programming.
D Press five times the [Enter] key (5.7).

Fig. 18 Litter bin indication

D Set with the setting key (5.6 or 5.8) after how
many cycles the machine must stop because
of a full litter bin (table 5 ).
Stop function Factory setting
Cyclus 100 x
Table 5 Litter bin full
TIP
− By pressing the key (5.6 or 5.8) longer you
quickly go through the range.
D Press the programming key (19.4) to finish the
programming.
6.2.7.1 Switch off the 'litter bin full'
indication
D Decrease the set value (§6.2.7) to the
minimum. 'OFF' appears on the display. Not
the indication/stop function 'litter bin full' has
been switched off.
WARNING
n Only switch off the 'litter bin full'
indication/stop function when you make use
of an external litter bin below the worktop
(§3.2.2).
Set by you
17
version 1.0