Bresser Tendence 70-01 100 Manual Del Usario página 44

OPERATION
• To select the indoor/ outdoor temperature and humidity mode, press
UP (▲) or DOWN (▼) until the IN icon
sound alert.
VIEWING REMOTE (CHANNEL) TEMPERATURE AND HUMIDITY
Static Display:
• Press the CHANNEL button to select measurements from different
remote sensors, each is MODE to a unique channel 1, 2 or 3.
Channel Auto-Scan Display:
• To enable an automatic scan of all channels, press and hold CHAN-
NEL, until the
remote channel will be alternately displayed with a 5 seconds view-
ing.
NOTE: the channel auto-scan feature can be active only if there are
more than one remote sensors operating and are MODE to different
channels.
PROGRAMMING TEMPERATURE IN CELSIUS OR FAHRENHEIT
• Press and hold MODE button for 3 seconds to toggle the tempera-
ture unit in Celsius (ºC) or Fahrenheit (ºF).
SETTING TEMPERATURE ALARM
• Press ALARM button selecting the desired alarm, the upper tempera-
ture alert with
ture alert with
• Press and hold ALARM button until the temperature digits fl ashing.
• Adjust the temperature digits using the UP (▲) or DOWN (▼). Press
and hold either button for fast digits advance
• Press the ALARM to confi rm selection and return to the temperature
alarm selection screen
icon is displayed. The measurements from each
icon (if disabled, displays OFF), or lower tempera-
icon (if disabled, displays OFF).
fl ashing with a beep
44