Connect Supply Tubing To Sprayhead - Bradley Terreon TDB3104 Manual Del Usuario

TDB3104, WF3204
4

Connect Supply Tubing to Sprayhead

Install 1/2" supply tubing in the sprayhead
using the male connector.
• Using a sharp razor, cut tubing squarely
and remove any burrs. DO NOT pinch or
crush end of tubing.
• Loosen nut on fitting. Moisten end of
A
tube and push into fitting until it is firmly
seated. Tighten nut to secure tube
to fitting (make sure nut is securely
tightened).
• If connector leaks, reseat tubing. If
leaking persists, replace male connector,
or call your Bradley representative for
assistance.
10 1/15/2013
Sprayhead
Tubing
Bradley • 215-1078 Rev. T; ECN 12-00-004
Installation
Male Tube
Connector
Nut
Tubing