Sprayhead Parts List And Troubleshooting - Bradley Terreon TDB3104 Manual Del Usuario

Installation
Sprayheads — Standard w/Neoprene Spray Ring Grommet
Repair kit does not include sprayhead
grommet. Order as a separate item.
Parts List
Item Part No.
1 125-001DE Neoprene Washer - Top
2 139-031 Sprayhead Manifold
3 124-001AL Washer
4 160-211 Carriage Bolt
5 115-061 Sprayhead - Top
6 116-008 Sprayhead - Bottom
7 124-001AT Washer
8 161-025 Nut
9 124-020D Sprayhead Grommet - Semi-Circle
10 125-001DF Neoprene Washer - Bottom
Sprayhead Service Suggestions
Problem
Water splashes over the
rim of the bowl.
Water flow diminishes
from the sprayhead.
The sprayhead shown above includes a perforated neoprene spray ring grommet that is self-cleaning. The
water pressure flexes the spray holes which slows accumulation of foreign matter and tends to "break loose"
any such deposits that may have accumulated.
Bradley • 215-1078 Rev. T; ECN 12-00-004
Description
Possible Cause
Foreign matter has reduced
the size of the sprayhead slots,
causing greater pressure at the
open slots.
Strainer portion of the stop-
strainer-check valve is plugged.
1 3
2
7
10
8
Sprayhead
Assembly
S05-054B S45-051
Qty
1
1
3
3
1
1
3
3
1
1
Clean the sprayhead:
1. Disassemble the sprayhead and dislodge any dirt, lime build-
up and foreign debris with a wire brush.
2. Sprayheads with rubber grommet spray rings may be cleaned
by rubbing a coin over the grommet.
3. Throttle down the volume control (water spray should strike
the bowl without splashing outside of the bowl).
Remove and clean the strainer screen from the stop-strainer-check
valve.
1/15/2013
TDB3104, WF3204
4
5
9
6
Repair
Kit
1
—
4
4
—
—
4
4
—
1
Solution
21