Fein ABLK18-1.3TE Serie Instrucciones De Uso página 13

OBJ_BUCH-0000000262-001.book Page 13 Thursday, June 30, 2016 3:57 PM
Adjustments.
Before mounting or replacing application tools or accessories, remove the bat-
WARNING
tery. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Setting the cutting direction
(figure 3).
Unscrew the union nut approx. 3 turns.
Pull the die downward.
Turn the die in the cutting direction, then
push it up ensuring that the die engages in the
groove.
Tighten the union nut.
Fig. 3
Union nut
Die
3.
5.
en
13
1.
2.
3.
4.