Additional Features - Corsair T2 ROAD WARRIOR Manual De Instrucciones

Additional Features

1. Attach Neck Pillow
A. The neck pillow has a snap
attachment that allows the
pillow to be installed in two
different ways. You can slide
the band over the top of the
headrest for taller placement
of the pillow or attach the
pillow through the holes in
the neck area for a lower
placement of the pillow.
7 7
2. Attach Lumbar Pillow
A. The straps for the lumbar pillow
will need to be run in two different
directions.
B. One set will go through the opening
between seat cushion and seat back.
C. The top will be routed through the
holes in the shoulder area.
D. Once both sets of straps have been
routed, they can be snapped together
on the backside of the chair.
E. Slide the lumbar pillow up or down to
suit your ergonomic needs.
User Manual
WARNING: Improper use of this chair may cause damage to this chair or
result in personal injury. Please use this chair in a non-abusive manner.
1. Adjustment levers
A. Tilt/angle lock
I. Push the lever down to prevent the chair from tilting or to lock the
chair seat angle. Pull the lever up to disengage the lock.
II. TIP: If you find that the chair angle does not disengage after pulling
the lever, tilt the seat front and back to release the lock.
B. Height adjustment lever
I. To lower the height of the chair, pull the lever up while weight is
applied on the chair. To increase the height, pull the lever up while the
chair is empty.
C. Tilt tension knob
I. Rotate this knob to increase (+) or decrease (-) the tilt tension.
II. TIP: If the chair tilts easily, you may want to increase the tension.
Alternatively, decrease the tension if it you find it too hard to lean back
while sitting on the chair.
B A
C
8 8