Kaco blueplanet 29.0TL3 Serie Manual página 42

9 | Configuration and operation
Country- Me- Display/
spec. nu Setting
Settings le-
vel
Fecha & hora
1
2 3 4
Red
1
2 3 4
DHCP
1 2 3 4 4
On / Off
Dirección IP
1 2 3 4 4
Dirección IP
1
2 3 4
Másc. subred
1 2 3 4 4
Pasarela
1 2 3 4 4
Servidor DNS
1 2 3 4 4
Serv. web
1 2 3 4 4
Modo de funcion.
1 2 3 4 4
Puerto
1 2 3 4 4
Configuración remota
1 2 3 4 4
On / Off
Actualización remota
1 2 3 4 4
On / Off
Test de conexión al
1 2 3 4 4
portal
Off | Meteocontrol |
User-defined 1-4:
Modbus TCP
4
1 2 3 4
Activación
1 2 3 4 4
Write access
4
1 2 3 4
Página 42
Action in this menu/meaning
AVISO: For self-diagnostics, the device performs a restart on a
daily basis at 0:00 hours. To avoid having a restart occur du-
ring feed-in operation and to always obtain reliable log data,
ensure that the time is correctly set.
F Set the date and time.
Open the menu: Press the Right arrow button or Enter but-
ton.
AVISO: The "IP address", "Subnet mask", "Gateway" and
"DNS-Server" menu options are only displayed with DHCP di-
sabled.
F Activate or deactivate DHCP.
On: Once the DHCP server becomes available, the IP address, subnet
mask, gateway and DNS server are automatically applied and the afore-
mentioned menu options are hidden.
Off: Apply settings manually.
F Allocate a unique IPv4 address in the network.
NOTE: The "IP address", "Subnet masks", "Gateway" and "DNS server"
menu items
are only displayed with DHCP disabled.
F Assign a subnet mask.
F Enter IPv4 address of the gateway.
F Enter IPv4 address of DNS server.
F Open the menu: Press the Right arrow button or Enter
button.
F Activate or disable the integrated web server.
F Set the port at which the web server can be reached.
F If necessary, activate the remote configuration.
F If necessary, activate the remote update.
↻ Your IT infrastructure must be adequately protected.
F Select operating mode.
Off: The connection to the portal is deactivated.
Meteocontrol: The device attempts to connect to the Webportal blue-
planet web of meteocontrol.
User defined 1-4: The device attempts to log on via a user-defined por-
tal that was set up by way of remote access.
F Activate/disable function.
. AVISO: The menu options "Write access" and "Port" are
only displayed with TCP activated.
1. Activate Modbus TCP.
F Allow Modbus TCP write access.
Manual
Kaco blueplanet 29.0TL3