Sportec Sonopuls 190 Manual De Uso página 44

[4] Mains Switch
To switch the unit on and off
When turning the unit off the display remains visible for a few seconds (low-energy method).
[5] Connector for mains cable
To disconnect the device from the power line, unplug the power cord.
[6] Type number/warning sticker
Provides information on the apparatus, such as type and serial number, as well as connection data such
as mains voltage and maximum current consumption.
7
[7] Connection Ultrasound applicator A
Ultrasound applicator connection left side
[8] Connection Ultrasound applicator B
Ultrasound applicator connection right side
CAUTION:

Connection of accessories other than the ones specified by the manufacturer can adversely
affect the safety of the patient and correct functioning of the equipment, and is therefore not
permitted. For combined applications only use Enraf-Nonius type BF equipment. The very low
leakage current of this type of equipment ensures absolutely safe therapy.

The ultrasound applicator is a precision instrument. Great care has been taken during the
development and in production to obtain the best possible beam characteristics. Rough treatment
(jarring or dropping) can adversely affect these characteristics, and must therefore be avoided.

The selection for activating the output is in the ultrasound menu.

Only 1 canal can be active. You cannot work simultaneously with applicator A and B.
8
43