Others; What Is Tmc Traffic Information Centre; Changing The Setting Of Fm Frequencies; Connection Diagnosis - Clarion NAX943DV Manual De Instrucciones

ClarionNavi_English.book 29 ページ ２００４年３月１９日 金曜日 午後４時１８分

Others

What is TMC Traffic Infor-
mation Centre?
The TMC (Traffic Message Channel) Traffic
Information Centre provides information
about traffic jams, roadwork and closed
roads around your current location using FM
frequencies.
To receive the information, the TMC unit,
which is sold separately, needs to be con-
nected to this system.
The navigation system filters the information
received and displays related icons on the
map. For the setting of filters or for displayed
icons, refer to page E-13, "Icons displayed
after receiving information from the TMC
Traffic Information Centre".
If the information from the Centre about the
suggested route is received after the route
calculation is completed, you can request
the navigation system to calculate a detour.
Refer to page E-23, "Detour calculation
using the information from the TMC Traffic
Information Centre".
CAUTION
The information given by the RDS-TMC is
only a reference. It may not match the
actual traffic conditions.
Tips:
For the basic settings of RDS-TMC and how
to set certain traffic information to display,
refer to page E-13.
Changing the setting of FM
frequencies
1
button
2
[Navigation] key
3
[Traffic Information] key
4
[TMC Service Selection] key
5
Select the preferred reception method.
Automatic Tuning
The system automatically switches to the
most appropriate frequency available,
based on the current vehicle location.
Manual Tuning
Switching to a preferred frequency can be
done manually by selecting a frequency
or FM station displayed on the screen.
6
button

Connection diagnosis

This system is equipped with a self diagnosis
function and a confirmation function of input
signals from the vehicle.
When the navigation system malfunctions,
perform a self diagnosis and confirmation of
input signals.

Self diagnosis function

The connection between units of the naviga-
tion system can be confirmed by performing
a self diagnosis.
1
button
2
[Connection Diagnosis] key
3
[Self Diagnosis] key
4
The self diagnosis will start, and "Running
self diagnosis" will be displayed on the
screen.
5
The results of the self diagnosis will dis-
play the connection status between units
in colors.
E-29