GE JCAS745 Manual De Uso página 56

Using the oven controls. (on some models)
Throughout this manual, features and appearance may vary from your model.
1
12
Oven Control, Clock and Timer Features and Settings
1. BAKE Pad
Touch this pad to select the bake function.
BAKE Light
Flashes while in edit mode - you can change the
oven temperature this point.
2. BROIL HI/LO Pad
Touch this pad to select the broil function.
BROIL Light
Flashes while in edit mode - you can switch from
HI to LO BROIL at this point.
3. Display
Shows the operations you have selected, the time
of day and the cooking status.
4. COOK TIME Pad
Touch this pad and then touch the + or – pad to
set the amount of time you want your food to
cook. The oven will shut off when the cooking
time has run out.
5. START TIME Pad
Use along with the COOK TIME or SELF CLEAN pad
to set the oven to start and stop automatically at
a time you set.
6. OVEN LIGHT ON/OFF Pad
Touch this pad to turn the oven light on or off.
7. TIMER/CLOCK Pad
Touch this pad to select the timer feature. Then
press + and – pads to adjust time.
To set the clock, touch this pad and hold 3 sec-
onds and then touch the + and – pads. The time
of day will flash in the display when the oven is
first turned on.
56
2
11 10
3
9 8
8. START Pad
Must be touched to start any cooking function.
9. – Pad
Short taps to this pad will decrease the time or
temperature by small amounts. Touch and hold
the pad to decrease the time or temperature by
larger amounts.
10. + Pad
Short taps to this pad will increase the time or
temperature by small amounts. Touch and hold
the pad to increase the time or temperature by
larger amounts.
11. CLEAR/OFF Pad
Touch this pad to cancel ALL oven operations ex-
cept the clock and timer.
12. SELF CLEAN Pad
Touch this pad to select the self-cleaning func-
tion. See the Using the self-cleaning oven section.
CLEAN Light
Flashes while in edit mode-you can change the
length of time for the self-clean cycle at this
point. Glows when the oven is in the self-clean
cycle. After the self-clean cycle, the light will turn
off. Unlatch the door.
If "F-and a number, or letter" flash in the display and
the oven control signals, this indicates a function er-
ror code.
Touch the CLEAR/OFF pad. Allow the oven to cool for
one hour. Put the oven back into operation.
If function error code repeats, disconnect power to
the oven and call for service.
4 5
7 6