Victron energy VE Bus Multi Manual página 7

Wiring
To install your VBMC you will need:
An UTP (Unshielded Twisted Pair) cable with two RJ45 connectors (to connect to
•
a Multi or Quattro) available in 5, 10, 15, 20, 25 and 30 meters.
When using an external transfer switch you will also need two wires for
•
connecting the panel to the transfer switch. This connection can be made by
using 2 wires of 0.25 – 1.0mm². Refer to the transfer switch manual for more
information.
3