Camera Video Adjustment Screen; Camera Alc/Exdr Screen - JVC TK-C676 Instrucciones

CAMERA VIDEO ADJUSTMENT Screen

This menu sets the picture signal of the camera, such as the color level and contour enhancement.
Item
COLOUR LEVEL Sets the color level of the picture signal.
To increase
To decrease
Setting values : –5 to NORMAL to 5.
ENHANCE LEVEL Sets the contour enhancement which controls the sharpness of the monitor pic-
ture.
To soften the picture
To sharpen the picture : Set a larger value.
Setting values
PEDESTAL LEVEL Sets the pedestal level (black level) of the video signal.
To darken the picture
To brighten the picture : Set a larger value.
Setting values
AUTO BLK. CTL Use this function when darker parts of a picture are unclear even after the gain has
been increased using the AGC (Auto Gain Control).
ON
OFF : Turns this function off.

CAMERA ALC/ExDR screen

This screen adjusts the settings of automated functions relating to picture brightness.
Item
AVERAGE : PEAK Sets the method of exposure detection to the ratio between the average and peak
values.
Large Average value : Use this setting when areas other than the highlighted ar-
Large Peak value
Setting values
SHUTTER Sets the electronic shutter speed.
When the item "SENSE UP" is set to "x2" or higher, the, available settings for the
SHUTTER are limited to 1/100 and 1/120.
When the item "ExDR MODE" is set to "ON", the available settings for the SHUT-
TER are limited to 1/50 and 1/120.
Setting values : 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
MEMO
●
To reduce the flickering which occurs under fluorescent lighting, set the shutter speed
to 1/100 if your local power supply frequency is 50 Hz and to 1/60 if it is 60 Hz.
●
When a high shutter speeds are used, white stripes may be observed above and
below bright objects. This is called the smear phenomenon and is usual to CCD
cameras.
Function & Setting
: Set a smaller value.
: Set a larger value.
: Set a smaller value.
: –5 to NORMAL to 5.
: Set a smaller value.
: –5 to NORMAL to 5.
: When the black level of the video signal is low, the pedestal level is in-
creased automatically in order to improve the clarity of the darker parts.
Function & Setting
eas are filled with dark. (Example: 10:0)
: Use this setting when highlighted areas appear as halation.
(Example: 5:5)
: 10:0, 9:1, 8:2, 7:3, 6:4, 5:5
Initial Value
NORMAL
NORMAL
NORMAL
OFF
Initial Value
8:2
1/50
E-23