Care & Cleaning - Sage Milk Cafe BMF600 Guía Rápida

CARE & CLEANING FOR YOUR SAGE
Both the milk jug and frothing disc should be
cleaned immediately after each use to prevent
build-up of milk residue.
1. Unplug the power cord from the power outlet
before cleaning.
2. The milk jug and frothing disc will be hot
immediately after use, so carefully remove
the milk jug from the power base and fill with
tap water. Once the milk jug and frothing disc
have cooled completely, remove the frothing
disc and rinse off any milk in warm water.
3. Wash the milk jug, jug lid, measuring cap
and frothing disc in warm soapy water, rinse
and dry thoroughly.
The seal from the lid can be removed and
washed separately.
4. Wipe the exterior of the power base with
a soft damp cloth. Dry thoroughly.
NOTE
Do not use alkaline or abrasive cleaning
agents, steel wool or scouring pads on any
part of the milk frother as these can damage
the appliance surfaces.
NOTE
Never immerse the power base in water
or any other liquid. The outside of the milk
jug must always be clean and dry before
placing on the power base prior to use.
NOTE
The milk jug, jug lid, measuring cap and
frothing discs can be washed in
the dishwasher (top shelf only). However
to extend the life of the frothing discs, we
recommend these are washed by hand.
MILK CAFÉ
™
®
EN
9