Kohler K-706000 Guía De Instalación Y Cuidado página 24

Clip
Down
Tab Up
21. Assemble the Outside Panel
NOTICE: The outside panel roller mounting holes are 3-1/8" (79 mm) below the top of the panel.
Position the roller on the opposite side of the panel as the label.
Install the outside rollers with the tab on the clamp on top.
Secure each roller with a #10-24 x 1-1/4" screw.
Hold the clip downward as the screw is tightened.
Using a hand screwdriver only, tighten the screws securely until the clip cannot be rotated by
hand.
1314827-2-B
Clip Assembly
Outside Roller
3-1/8"
(79 mm)
24
Clamp
#10-24 x 1-1/4"
Kohler Co.