Leica CF 22 Instrucciones página 37

Problem:
Flash photos are overexposed.
• Make sure that the flash unit is correctly insert-
ed in the camera's accessory shoe!
• Set the flash unit to
• The distance to the subject may not be less than
10% of the maximum range of the flash light!
• Select a lower ISO sensitivity on the camera
and/or a higher aperture value!
• Have you set an exposure correction value
for flash photos on the camera?
Problem:
Flash photos are underexposed.
• Make sure that the flash unit is correctly insert-
ed in the camera's accessory shoe!
• Set the flash unit to the operating mode
• The distance to the subject may not exceed
10 % of the maximum range of the flash light!!
• Set a higher ISO sensitivity on the camera
and/or a lower aperture value!
• Have you set an exposure correction value
for flash photos on the camera?
TTL
mode!
TTL
!
Problem:
Flash photos are not properly illuminated at
the edges.
• Attach the wide-angle diffuser!
• Use longer focal lengths for your shots.
Problem:
Range is not indicated in the LC Display.
• Make sure that the flash unit is correctly insert-
ed in the camera's accessory shoe!
• Data exchange has not taken place between
the camera and the flash unit. Press the
camera release button.
• Your camera type is not transmitting com-
plete data for the aperture or ISO values to
the flash unit.
Unsuccessful attempts to identify faults
• Turn off flash unit (4) with the main switch,
wait briefly and turn it back on again.
• Reset flash unit settings (see p. 28).
If in the flash unit still fails to function despite
following the above instructions, then you
should contact an authorised dealer.
36