Erreka ROLLER V-II Manual Del Usuario página 18

If the code entered is incorrect, press ESC (Escape) to begin again. If it is
correct, press ENTER to continue.
If the console is personalised with an installer code different to 9999, a
transmitter number will be requested. If a transmitter series number
different to that given in the factory is not to be re-recorded, this
heading can be skipped by pressing Escape.
Although if individual transmitters are to be recorded, a four-figure number
between 0000 and 9999 must be entered, completed with zeros on the
left.
TRANSMITTER CODE?
Once the new code has been entered and after pressing Enter, the console
will display the code, together with the installation number for validation.
TRANSMITTER XXXX*YYYY
VALIDATE ENT/ESC
The console will keep this on the first line as a reminder and will request
the insertion of a transmitter, for which the cable connected to socket B
will be used
INSTALL. NO. * * * *
INSERT TRANSMITTER
The polarised connector is inserted into the socket located in the transmitter
battery holder housing and ENTER pressed so that the console may record
the data on the transmitter.
If the transmitter has no standard code or if it has been personalised by
another installer, the console will not be able to record on it and the
following message will appear on the second line:
ERROR NOT VALID
If the recording has been completed correctly, the following will be
displayed:
ENCODING OK
By pressing ENTER, the insertion of a transmitter is requested once again
and so on until all of the transmitters have been personalised.
In the event of having previously selected the option of re-recording an
individual transmitter code, the console will automatically increase the
new code number to be re-recorded.
Upon completion, return to the menu by pressing ESCAPE.
2.- ENCODE MEMORY
This option allows us to personalise standard ROLLER memories or previously
personalised memories for another subsequent installation with a matching
installer code.
This option can be entered when ENCODE MEMORY appears in the menu
in upper case letters and ENTER is pressed, leading to the insertion of a
memory in socket – A – being requested
INSERT MEMORY
IN SOCKET < A >
18
English