Changing The Password - Provision ISR C06 Manual De Instrucciones

3.1 Programming the keyboard:
To enter C06 setup mode, press the Setup button for 3 seconds and fill in the password (the
default password is 8888)

Changing the password:

Enter the setup menu and highlight PW SETUP.
Press Enter, and use the numeric keypad to enter a new 4 digit
password, press Enter, to cancel press ESC.
Resetting the keyboard to factory defaults:
Enter the Setup menu and highlight DEFAULT SETUP.
Press Enter, now you will see the option "DEFAULT SETUP?"
To confirm loading the default setup, press Enter, to cancel press ESC.
From the setup mode, you can change and control multiple PTZ
cameras and PROVISION-ISR DVRs.
To program PTZ addresses and baud rates follow these steps:
1) From the standby mode
seconds
2) Enter the keyboards password (default password: 8888)
and press Enter
3) Now you can select "PTZ setup" or "SYS setup"
4) Choose "PTZ setup" then Enter
5) Change the address of the PTZ then Enter
6) Change the PTZ protocol then Enter
7) Change the baud rate then Enter
8) To return to standby mode
(A)
hold the SETUP button for 3
(C)
(D)
(E)
(A)
press Enter to save and ESC
(B)
| P a g e
7