Using The Keyboard; Controlling A Ptz Camera - Provision ISR C06 Manual De Instrucciones

3.2 Using the keyboard:

From the main menu press SHIFT to switch between these two modes:

DVR mode: the C06 keyboard will control your PROVISION-ISR DVR

PTZ mode: the C06 keyboard will control your PTZ cameras

3.3 Controlling a PTZ camera:

To control a specific camera simply press SHIFT to enter PTZ mode. Then select a camera by
pressing Addr=>N=>Enter (N is the camera address).
To control the PTZ camera move the joystick UP, DOWN, LEFT or RIGHT. The further the joystick
is moved, the faster the movement. Be careful not to apply excessive force on the joystick. Twist
the joystick clockwise to zoom in and counter-clockwise to zoom out. The zoom level can also be
controlled by pressing the ZOOM+ and ZOOM- Key. To control other functions use the FOCUS+,
FOCUS-, IRIS+, IRIS-, WIPER and LIGHT buttons.
Note: some cameras do not have a wiper or other functions; in those cases those functions will
not work.
To add a preset, follow these steps:
1. Enter the PTZ mode by pressing SHIFT
2. Enter the preset input mode by pressing PRESET
3. Now select the desired visual place using the UP, DOWN, LEFT, RIGHT, ZOOM+ or
ZOOM- buttons, then press # (the preset number) and then ENTER.
4. To add an additional preset point repeat step 3
5. To exit preset input mode press ESC
To call a preset or control the PTZ, follow these steps:
1. Enter the PTZ mode by pressing SHIFT
2. Enter preset mode by pressing SHOT
3. Press # => Enter to go to preset number #
(a) DVR mode (b) PTZ mode.
8
| P a g e